MGT Europe - MGT-RM2033 Mains Connected Digital Room Monitoring System - thumbnail

MGT Europe – MGT-RM2033 Mains Connected Digital Room Monitoring System

MGT Europe – MGT-RM2033 Mains Connected Digital Room Monitoring System:

The MGT RM2033 is a two-channel digital room monitoring system which uses the 110/230 V mains supply as the receiving medium.

It consists of 2 MGT-TX RM2033 mains transmitters and one MGT-RX RM2033 mains receiver.

A jamming-prof and audio-secure digital transmission method is employed for signal transmission.

Thanks to the wide bandwidth of the transmission signal used, detection is strongly restricted, and decoding only possible with the special receiver MGT-RX RM2033. Different signal codes are available.

The receiver MGT-RX RM2033 is designed to be highly selective and sensitive and thus the range attainable is greatly increased.

It is possible to receive signals from two MGT-TX RM2033 simultaneously (stereo).
You can listen in on with headphones. It is possible to listen into the reception channels either separately 9mono) or together (stereo).
For recording on any recorder, a LF-amplifier output for each channel is available.

Due to its design, the MGT-TX RM2033 can be problem-free installed into concealed installation sockets or similar.

It is powered by energy from the mains grid and emits its encrypted signal over a separate connection to the grid. Therefore, two ways of switching are possible:

1. Feeding-in of the encrypted signal into the protective conductor

2. Feeding-in of the encrypted signal onto the grid phase.

The Data Sheet is available only for registered users.

Please Login or Sign Up.